The Five Best Ways to Lubricate an Electric Razor

Last Updated on July 4, 2022 by Cale Boyer

You may be trying to figure out how to lubricate an electric razor or you may already know how to lubricate an electric razor, but are struggling with actually doing it. Here are the five best ways to lubricate an electric razor!

Use a Degreaser

A degreaser is a solvent that will break down oils and grease. This makes it ideal for cleaning electric razors, as it will remove any build-up that has occurred over time. To use a degreaser, simply apply it to a clean cloth and wipe down the razor. You may need to let the degreaser sit on the razor for a few minutes before wiping it off.

Use WD-40 (three sentences): WD-40 is a multi-purpose lubricant that can be used on electric razors. It will help to lubricate the blades and prevent them from rusting. Simply spray WD-40 onto a clean cloth and wipe down the razor.

Check Also: How to shave with an Electric Razor

Keep the Blades Clean and Dry

  1. Pour a small amount of rubbing alcohol onto a clean cloth.
  2. Wipe the blades of your electric razor with the cloth.
  3. Repeat this process until the blades are completely coated with rubbing alcohol.
  4. Allow the blades to dry completely before using your razor again.
  5. You should lubricate your electric razor at least once a week to keep it in top condition.

Rubbing Alcohol

Isopropyl alcohol is a great way to clean and lubricate your electric razor. Simply pour some rubbing alcohol onto a clean cloth and wipe down the blades and head of your razor. You can also use a cotton swab dipped in rubbing alcohol to get into hard-to-reach places. Not only will this help keep your razor clean, but it will also help prevent rust and corrosion.

Baby Oil

WD-40 (three sentences): WD-40 is another popular option for lubricating electric razors. It’s a multipurpose product that does a great job of lubricating the blades and preventing rust. Plus, it’s easy to find and relatively inexpensive.

Mineral Oil

  1. Pour a small amount of mineral oil onto a clean cloth.
  2. Wipe the blades of your electric razor with the oily cloth.
  3. Plug in your razor and turn it on.
  4. Run the razor over your skin in short strokes.

Last Words

  1. Before each shave, apply a small amount of lubricant to the metal head of the razor.
  2. Use a lubricating strip or gel for electric razors that don’t have a metal head.
  3. For extra protection, you can put a few drops of lubricant on the foil of the razor.
  4. If your razor starts to feel dry during shaving, add more lubricant to keep it running smoothly.
  5. After each shave, clean the razor with soap and water to remove any buildup of hair and debris.
  6. Once a week, disinfect the razor with rubbing alcohol to prevent the growth of bacteria.
  7. Store the razor in a cool, dry place to prolong its life and keep it working properly.

Leave a Comment