3 Steps to Remove Razor Blades from a Disposable Razor.

Last Updated on July 23, 2022 by Cale Boyer

If you’re tired of being left with multiple disposable razors after each shave and all the razor blades are stuck together, then this article is for you! In this article, we will go over three steps to remove razor blades from disposable razors. It doesn’t matter what brand or model of disposable razor you have, these three steps will help you get your blades separated and out of the cartridge once and for all! Let’s get started!

What You Need

A sharp razor is one of the most important tools in your grooming arsenal, but it only works if it’s properly cared for. Here’s how to remove razor blades from a disposable razor.

First, hold the blade securely and use your fingers or pliers to break off any exposed metal sticking out of the plastic guard on the head (this will help prevent cuts).

Then, take a pair of needle-nose pliers and place them on either side of the blade at an angle. Bend them together so that they pinch against each other as you pull up and away from the handle. The blade should easily come out with this maneuver.

Finally, just wipe down all surfaces with soap and water before storing.

Step 1: Soak the Razor in Water

The first step is to soak the razor in water. This will help loosen the blades and make them easier to remove. Be sure to use hot water, as this will make the process go more quickly.

Step 2: Heat the Razor

It’s important to heat the razor before attempting to remove the blades. This will help loosen the adhesive that’s holding the blades in place. To do this, simply run the razor under hot water for a few minutes. You can also hold it over a flame for a few seconds.

Conclusion

  1. Unscrew the razor head from the handle.
  2. Carefully remove the razor blades from the head.
  3. Throw away the razor blades and screw the head back onto the handle.

Leave a Comment